On car only brake disc lathe DL-202

On car brake disc lathe DL-202

Standard Accessories:

Standard accessories for DL-202
Standard accessories set:
  1. Electric input wire
  2. Drive adaptor
  3. Universal slide mounting with thread (BLUE)
  4. Universal slide mounting without thread (RED)
  5. Small mounting plates (pair)
  6. S-Hooks
  7. Oil pot
  8. Shims wash
  9. Cutting bits (4pcs)
  10. Hexagon key M6
  11. Brush
  12. Silence bands (S, M, L - sizes)

Main features:

* Working height min/max: 100cm/125cm (Option: 47cm/125cm)
Drive speed: 98rpm
Electrical specifications: 220V/110V/50Hz/60Hz
Ambient temperature range: -20°C to 40°C
Turning accuracy: ≤ 0.005mm
Brake disc runout: ≤ 0.005mm
Brake disc thickness variation: 0.005 – 0.01mm
Brake disc surface roughness: Ra 1.5 – 2
Net weight: 64kgs

 * For use with lift or on floor position

Lathe features:

Max. diameter of brake disc: 380mm (Option: 450mm)
Max. thikness of brake disc: 42mm
Adjustment knob accuracy: ≤0.02 mm ~ ≤0.01 mm
Feed rate: 8.5mm/min
Electrical specifications: 220V/110V  50Hz/60Hz
Net weight:  7.3kgs